Castlevania: Belmont's Curse Patch Notes: 1.1.3 Fix

Latest verified facts — Checked October 22, 2026 against the official store listings: Steam

• Castlevania: Belmont's Curse was released on October 15, 2026.
• Platforms: Steam, Windows.

What Changed in Ver. 1.1.3?

Stuck at a black screen before you can play? The Castlevania: Belmont's Curse patch notes for Ver. 1.1.3 address a launch problem affecting high refresh rate monitors, making this update relevant if the game has been refusing to start. The key takeaway from these Castlevania: Belmont's Curse patch notes is straightforward: the update is intended to improve that problem, but the black screen can still occur in certain environments.

Released on October 16, 2026, Ver. 1.1.3 targets a frustrating startup issue: the game can fail to launch while displaying a black screen on a high refresh rate monitor. Work toward a complete resolution continues, and players who still cannot launch after updating are directed to Customer Support.

Update detail	Ver. 1.1.3
Release date	October 16, 2026
Targeted problem	Failure to launch with a black screen
Affected display category	High refresh rate monitors
Expected effect	Improvement to the launch issue
Remaining issue	The problem can persist in certain environments
Next action if launch still fails	Contact Customer Support

For anyone waiting to get into the game, the distinction between an improvement and a complete resolution matters. Installing the update gives you the current attempt to address the problem. A black screen afterward still falls within the issue being worked on.

Read these Castlevania: Belmont's Curse patch notes with that specific startup problem in mind. The practical information is concentrated around getting the game to launch, recognizing whether the problem remains, and knowing when to move to support.

Why High Refresh Rate Monitor Users Should Pay Attention

The affected situation has two connected parts: a high refresh rate monitor and a launch failure that leaves a black screen. If that describes what happens when you start the game, Ver. 1.1.3 addresses the problem you are trying to get past.

A black screen at startup leaves you with little useful feedback. You are trying to reach the game, but the screen itself does not explain why the launch failed. Knowing that this particular combination is being addressed gives you a concrete next action: apply the update and check whether the game launches afterward.

The wording around Ver. 1.1.3 also sets an important expectation. The update is expected to help, while some environments can continue to encounter the same failure. Those two statements belong together when deciding what the patch means for your own setup.

Part of the problem	What it means for you
High refresh rate monitor	This is the display category associated with the issue
Black screen during launch	This is the visible symptom the update addresses
Game fails to start	You cannot proceed into the game
Failure continues after updating	Customer Support is the next directed step

Keep the symptom precise when deciding whether this update addresses your situation. “The game will not launch and shows a black screen” describes the affected behavior clearly. That specificity is useful when you move from reading about the update to checking your own launch result.

The Castlevania: Belmont's Curse patch notes also acknowledge players who have been waiting to play because of this problem. For those players, the useful outcome is reaching the game after updating. Until that happens, the launch issue remains the thing to resolve.

If you are still affected, keep the remaining limitation in view: the problem can persist even after Ver. 1.1.3. Continued trouble is a reason to follow the support direction included with the update.

What to Do After the Update

Apply Ver. 1.1.3, then try launching the game. The question to answer is simple: does the game now start, or does the black screen still prevent you from getting in?

Keep this check focused on the behavior the update addresses. You are looking for a change in the launch outcome. If the game starts successfully, you have cleared the immediate obstacle that brought you to these patch notes.

If it still fails to launch, contact Customer Support. That is the next action given for players who remain affected after installing the update.

Your situation	Next action
You encounter the high refresh rate monitor black screen issue	Apply Ver. 1.1.3
You have applied the update	Try launching the game
The game launches successfully	Continue into the game
The game still fails to launch	Contact Customer Support

The useful sequence is short:

• Apply the update addressing the launch problem.
• Check whether the game starts afterward.
• Contact Customer Support if the failure continues.

The Castlevania: Belmont's Curse patch notes do not promise that every affected environment will recover with this update. Keep that limitation attached to the instructions above: applying the patch is the immediate action, and support is the follow-up when it does not get you into the game.

Pay attention to the outcome after the update, especially if you have been unable to play for a while. The earlier failure explains why you needed the patch; the current result determines what you do next.

A successful launch answers the immediate question for your session. A continued failure gives you an equally clear next step. Either result is more useful than assuming the update has solved the problem before trying the game again.

When to Contact Customer Support

Contact Customer Support if the game still will not launch after the update. You do not need to wait for another patch announcement before following that direction.

This applies directly to the situation Ver. 1.1.3 is trying to improve: you install the update, start the game, and the black screen continues to block the launch. The ongoing work toward a full resolution does not change the support instruction for players experiencing that result now.

When explaining the issue, describe the launch failure plainly. Keep the connection between the update and the remaining symptom easy to understand.

For example, if it accurately describes your situation:

After updating to Ver. 1.1.3, the game still fails to launch and displays a black screen. I am using a high refresh rate monitor.

That is an example of how to describe the affected behavior. Use it only if those details match what is happening on your setup.

Detail to communicate	Relevant information
Update applied	Ver. 1.1.3
Remaining launch result	The game still does not start
Visible symptom	A black screen
Display context	A high refresh rate monitor, if applicable

The Castlevania: Belmont's Curse patch notes make support part of the response to a continued failure. Following that route is appropriate even while a broader resolution is still being developed.

Keep your description centered on the problem you can actually see. The game failing to launch after the update is the reason for contacting support; the black screen and display context explain how that failure presents itself.

For a player who has already installed Ver. 1.1.3 and remains stuck, this is the most actionable part of the update. There is a next step available while work on the issue continues.

What the Ongoing Fix Means for Future Updates

Work toward a full resolution is continuing. Further information about future updates will be shared when it is ready.

That gives you two separate things to act on: the update already released and the continuing effort to address environments where the problem remains. Use Ver. 1.1.3 for the immediate launch check, then follow the support instruction if you are still blocked.

The Castlevania: Belmont's Curse patch notes describe this as an issue receiving continued attention. The current patch is an attempt to improve access to the game, with additional work still needed for the remaining failures.

When reading a later update about this problem, keep the same practical question in focus: what does it change about the launch failure affecting your setup? For someone stuck at a black screen, that is the detail that determines whether another update helps them reach the game.

For now, the useful takeaways are:

• Ver. 1.1.3 was released on October 16, 2026.
• It addresses a black screen and launch failure associated with high refresh rate monitors.
• Some environments can still experience the problem.
• Players whose game still will not launch after updating should contact Customer Support.
• Work toward a complete resolution continues.

Keep the update's intended improvement and its remaining limitation together. That gives you a realistic expectation before launching and a clear response afterward, whichever outcome you get.

FAQ

What do the Castlevania: Belmont's Curse patch notes for Ver. 1.1.3 address?

Ver. 1.1.3 addresses a problem where the game can fail to launch and display a black screen on high refresh rate monitors. The update was released on October 16, 2026, and is expected to improve that issue.

Does Ver. 1.1.3 completely resolve the black screen problem?

The problem can still occur in certain environments after Ver. 1.1.3. Work toward a complete resolution continues, so check whether the game launches after updating and follow the support direction if it remains blocked.

What should I do if the game still will not launch after updating?

Contact Customer Support. Describe the continued launch failure and black screen, and include the Ver. 1.1.3 update and high refresh rate monitor context when those details match your situation.

Will there be more updates about the launch issue?

Work on the launch issue continues, and further information about future updates will be shared when ready. If you are currently unable to launch after updating, contact Customer Support while that work continues.